Business Cards

Spot Raised UV Business cards

Spot Raised UV Business cards, these laminated cards feel very luxurious and high end. Cards are printed on 14pt. or 16pt. card stock, then laminated on both sides with 1.5 mil scratch resistant, soft velvet laminate, which give them a substantial thickness of 16pt. or 18pt. This laminated surface is writable with a fine point permanent marker.

Various finishing options are available:Spot UV, Foil(Gold and silver), Rounded corners.

Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides.
Make sure that all images are embedded, and that all the text is outlined.

Special Instructions
Please submit two PDF files:

1. Regular full color artwork
2. Spot UV template indicating the area of the SPOT UV. On template file, indicate area of SPOT UV by using 100% K. Non UV areas should be white. For best results, ensure this file is vector.

If seeking overall UV coating on one side, ensure that you order SPOT UV coating on two sides; page with overall coating should be indicated so on template file with 100% K taking up entire page

If ordering a 4/4 job with Spot UV on only one side, please ensure that page 1 of your artwork is the spot UV side

Spot UV

Art cannot be extended to cutting edges, otherwise there is a high possibility for the varnish to peel off (there should be at least 5mm of free-varnish area around cutting edges). Failing to do so will result into delays and/or creating product that is not as per expectation.

Spot UV accuracy

Positioning of the spot UV cannot be 100% guaranteed. Please note that there may be a shift of approximately 1/16″ in the spot UV position on the printed product.
Therefore we recommend that the spot UV not be placed on small text or very small images.

How To Set Up Your Files Learn More
File Preparation Guidelines
Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
Files must be submitted with proper orientation to ensure proper back up.
It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
Black type should have the following values: C0, M0, Y0, K100.
Embed or outline all fonts.
For best colour results, supply a CMYK only files.

Additional information

Dimensions 11 × 5 × 4 in